HP NonStop SQL/MX, Руководство по сообщениям

Страница: 398 / 752

MXCI Messages (15000 through 15999)
HP NonStop SQL/MX Messages Manual — 640324-001
15 -10
SQL 15203
Where
int1
gives the maximum number of errors permitted for one command.
Cause. Excessive error messages are issued, and at least one is dropped.
Effect. The command fails with errors previously reported. This message is always
the last one reported for a given error.
Recovery. Correct the problem defined by the first error, which is normally the most
meaningful.
SQL 15205
Where
int1
is the subsystem error number.
Cause. An attempt to determine a subsystem error fails. If the
int1
value is 500, 501,
or 516, connection to the service is not operational. In rare cases, a disconnect arrived
from the SERVICE being examined.
Effect. A lower-level error might have been lost unless the connection just failed.
Recovery. See the first error message displayed for the event (primary message) to
determine the problem and the recovery action.
SQL 15206
Where
int1
is the value of the return code from the library call. This code is provided
for problem analysis by support or development personnel.
Where
function-name
is the name of the library function called.
Cause. A subsystem error is not converted to a meaningful string. The error number
has meaning only to the library subsystem for the specified function call.
Effect. The command and subsequent call to the subsystem fails.
Recovery. See the first error message displayed for the event to determine the
problem and recovery action. If provided, also see lower-level error messages for
additional information. Using an appropriate MACL INFO command, check the status
of the target object or related object for indication of a problem.
15203 Maximum of int1 error messages exceeded, dropping the
rest.
15205 SUBSYSTEM: Request for LowLayer error message failed,
return code
int1 from CFGFetchError.
15206 SUBSYSTEM: Bad return code int1 , library call
function-name failed.