Setting Up the HP NetServer E 800
20
SCSI controller board from a third-party).
You will need to use the NOS vendor’s installation process. Be sure to
first view and print the HP-customized NOS installation instructions
and create the driver disk(s) for the NOS you are installing before
leaving Navigator and installing your NOS.
3. Install or Configure Tape Backup Software:
◊
If your NetServer includes a preinstalled tape backup device, install
and/or configure the tape backup software now.
Refer to the Tape Backup Getting Started Guide for instructions on
installing and configuring the tape backup software.
4. Refer to the HP NetServer Online Documentation CD-ROM:
◊
Use this CD-ROM for updated information about your HP NetServer
and as reference for any additional information not provided in this
Installation Guide.
NOTE
If you plan to use the Remote Console feature to run
HP TopTools utilities remotely, the Utility Partition must be
created using the HP NetServer Navigator. If you choose the
Express or Guided mode of configuration, the partition will be
created automatically. Otherwise, you will need to choose
Install/Update Utility Partition during the custom
configuration process.
5. Run DiagTools:
(Optional)
◊
Create the HP DiagTools diskettes from the NetServer Utilities (or
Diskette Library) on the HP NetServer Navigator CD-ROM.
◊
Run HP DiagTools and after completing all the configuration topics,
save the support ticket to a diskette for future reference.
