HP NetServer AA 4000, Руководство по установке

Страница: 49 / 82

Installing Windows and the Endurance Software 3-11
To install network software:
Step Action Notes
1 Install the Endurance Virtual Network Provider as a network adapter
using the Add New Hardware Wizard.
a. Using the Control Panel, start the Add/Remove Hardware Wizard.
b. Click Add/Troubleshoot a device .
c. Select Add a new device .
d. Select No, I want to select the hardware from a list.
e. Select Network adapters , then Have Disk .
f. Browse to
drive \ folder \system32\drivers\MtcPnP
to add the service:
Service File
Endurance Virtual Network Provider
netmtcvnp.inf
(MtcVnP)
The wizard completes the installation of the Virtual Network Provider.
Note: Ignore the warning
Digital Signature Not Found
,
and continue the installation.
drive \ folder
is
the drive and folder
where you installed the
IOP root. (You can find
this in the
%SystemRoot%
environment variable.
For example,
C:\WINNT
2 Install the Endurance network services.
a. Right click on My Network Places on the desktop, then select
Properties .
b. Right click on any configured adapter, and select Properties .
c. Click Install , Service , Add , then Have Disk .
d. Browse to
drive \ folder \system32\drivers\MtcPnP
to add the
services:
Service File
Endurance Datagram Service (MtcDgs
netmtcdgs.inf
Endurance Ethernet Provider (MtcEthP
netmtcethp.inf
Endurance IOP Link Driver (MtcEtx
netmtcetx.inf
After installing the first
service, repeat steps C
and D two more times
to install the other two
services.
3 Adjust the network bindings:
a. From the Properties page, select each adapter, then Properties .
b. Using the check boxes, make the necessary adjustments for the
network bindings.
See Table 3-1 .