HP Neoview Messages, Руководство пользователя

Страница: 202 / 400

name
is the name of the subsystem.
number
is the error number.
Cause Transaction subsystem
name
has returned error
number
while performing a waited
rollback transaction.
Effect
The operation fails.
Recovery Contact the GMCSC.
SQL 8612
8612 Transaction mode cannot be set if the transaction is already
running.
Cause You attempted to set the transaction mode, but the transaction is already running.
Effect The operation fails.
Recovery Abort and restart the transaction if you must change its mode.
SQL 8613
8613 SQL cannot commit or rollback a transaction that was started by
application.
Cause An application started a transaction outside of the HP Neoview database software
that the Neoview database software could not commit or rollback.
Effect The operation fails.
Recovery The application that started the transaction must perform a commit or rollback.
The Neoview database software must start any transactions it will later commit or rollback.
SQL 8614
8614 SQL cannot begin a transaction when multiple contexts exist.
Cause The HP Neoview database software cannot start a transaction when multiple contexts
are present.
Effect
The transaction is unable to start.
Recovery
Do not attempt recovery. HP support will perform recovery operations in response
to an automatically generated dial-out message about this condition.
SQL 8650
8650 Number of source partitions($0~int0) must be the same as the number
of target partitions($1~int1).
$0~int0
is the number of source partitions.
$1~int1
is the number of target partitions.
Cause
The number of source partitions and target partitions are different.
Effect
The operation may fail or succeed.
Recovery
Recreate the target table with the same number of partitions as the source table.
SQL 8651
8651 DDL validation failed. Source($0~string0) and Target($1~string1)
do not have the same definition.
$0~string0
is the source object name.
$1~string1
is the target object name.
Cause The definitions of the source object and the target object are different.
202 Executor Messages (8000 Through 8999)