HP MR Gen10 Plus Скачать руководство пользователя страница 99

Страница: 99 / 179

Array and controller configuration

During the initial provisioning of the server, you must configure the controller using the configuration utility in UEFI System Utilities.

After the initial provisioning of the server, you can use any of the following options to configure the arrays and controllers:

UEFI System Utilities

MR Storage Administrator

StorCLI

MR Storage Administrator and StorCLI are available in the Service Pack for Proliant (SPP).

For more information about using each configuration utility, see the documentation for the configuration utility.

NOTE:

Any RAID configuration created for the MR controller cannot be moved to SR controllers.

The message "Data Protection disabled" in the logical drive properties can be ignored as it refers to a feature not
currently supported by the MR Storage Administrator product.

More information

MR Storage Administrator

StorCLI

UEFI System Utilities

Array and controller configuration

Содержание MR Gen10 Plus




















































































































































































Результаты поиска

Содержание MR Gen10 Plus

Отзывы:

HP MR Gen10 Plus, Руководство пользователя, Страница: 99 / 179

Результаты поиска

Содержание MR Gen10 Plus

Отзывы: