HP MR Gen10 Plus Скачать руководство пользователя страница 105

Страница: 105 / 179

Viewing controller information and performing common actions

Use the Dashboard View screen to view the properties of the controller, view the server profile, and perform common actions.

Procedure

1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+.

2. In the Dashboard View panel, click Main Menu to access the main menu.

3. Click Help to view the help content.

4. View the properties.

Setting

Definition

Status

Status of the controller.

Backplane

Number of backplanes connected to this controller.

Enclosure

Number of enclosures connected to this controller.

Drives

Number of drives connected to this controller.

Arrays

Number of arrays on this controller.

Logical
Drives

Number of logical drives on this controller.

ROC
Temperature
(C)

The temperature of the ROC.

View Server
Profile

Shows the UEFI spec version that this system supports and menu options such as Controller Management,
hardware Components, Drive Management, and Logical Drive Management.

5. Perform the common actions, as needed:

Configure

Setting factory defaults

6. View any background operations in progress.

7. View the status of the advanced software options.

NOTE:

In this version of the controller, all advanced software options are enabled.

8. Optional. Click Manage MegaRAID Advanced Software Options to view the list of activated advanced software options.

Viewing controller information and performing common actions

105

Содержание MR Gen10 Plus




















































































































































































Результаты поиска

Содержание MR Gen10 Plus

Отзывы:

HP MR Gen10 Plus, Руководство пользователя, Страница: 105 / 179

Результаты поиска

Содержание MR Gen10 Plus

Отзывы: