Removal and replacement procedures 43
6.
Remove the HP Moonshot 1500 Chassis Management Module ("
" on page
7.
Extend the chassis from the rack (on page
8.
Remove the access panel (on page
9.
Remove the midplane cover ("
" on page
10.
Disconnect and remove the fan cable ("
" on page
11.
Remove the four screws that secure the rear back-flow preventer to the chassis and slide the rear
back-flow preventer towards the midplane, tilting at an angle to remove.
To replace the component, reverse the removal procedure.
Bezel ear
To remove the component:
1.
Power down the chassis (on page
2.
Open the cable management arm (on page
3.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the chassis.
4.
Disconnect all peripheral devices from the chassis.
5.
Extend the chassis from the rack (on page
6.
Содержание Moonshot 1500
Страница 12: ...Customer self repair 12 ...
Страница 13: ...Customer self repair 13 ...
Страница 14: ...Customer self repair 14 ...
Страница 76: ...Acronyms and abbreviations 76 SSH Secure Shell UID unit identification UPS uninterruptible power system ...