8
3.
Attach the mass storage devices to the appropriate slotted mounting holes in the new mass
storage module as shown in Figure 5.
Stand–offs
Mounting Screws
Slotted Mounting
Holes
Figure 5 Typical Mass Storage Device Attachment to the New Mass Storage Module
4.
Secure loose cables with the tie–wraps provided to prevent damage to the cables while
sliding the tray in or out of the chassis.
5.
Slide the new mass storage module into the chassis, secure the screws, and connect the SCSI
interface cables.
System Verification
Please refer to your Owners Guide for information on running the appropriate diagnostics to verify
your system’s operation.
