b.
Enter
4 Activate Actual Values
.
c.
To reboot, enter
y
at the prompt. You must reboot to
activate the IP settings, product ID, and serial number
values.
10.
Access the Management module through the web interface.
a.
Launch a supported browser. The browser window
appears.
b.
In the Address field (Microsoft® Internet Explorer) or the
Location field (Firefox Mozilla), enter
http://ipaddress
(where
ipaddress
is the IP
address of the management module). The login screen
appears.
11.
Log in through the web interface.
a.
Enter the user name in the User Name field. The default
user name is Admin.
b.
Enter the password in the Password field. The default
password is Admin.
c.
Click
Sign In.
12.
Verify that the water source is available and turned on by
viewing the Water Flow status in the Overview menu.
13.
Click
Setup>Accounts,
and then change the default Web
Admin and Web User passwords.
14.
Click
Save Settings.
15.
(Optional, but recommended) Click
Setup>Management>Remote Access,
select
SSL Enable
.
16.
(Optional) Enter an SSL key.
17.
Click
Save Settings.
18.
To set up your trap receivers, click
Setup>Management>Trap
Receivers
.
19.
Click
Save Settings.
