HP LD4210 Скачать руководство пользователя страница 80

Страница: 80 / 160

Energy Saving

is used to change the energy-saving mode.

Factory Reset

is used to reset the display to the factory default settings. Be careful with this option

because all settings will be reset.

Scheduling

The

Schedule

tab allows you to schedule the power on and off of the display.

Clock

is used to set the current time of the display.

Select hour/minute/day, and then click

Set

to complete the time setting.

Click

Set by PC Time

to synchronize the clock of the display to the clock of the computer where

HP Network Sign Manager is installed.

Time Schedule Setting

is used to schedule the power on/off of the display.

The following describes how to schedule the power on/off of the display:

Select an option in the

Repeat Set

drop-down list to set the power on/off schedule. You can set

it to Daily, Monday to Friday, Monday to Saturday, Saturday to Sunday, or day of week.

Set both

On Time

(time to turn the display on) and

Off Time

(time to turn the display off). You

can specify

On Time

and

Off Time

separately by selecting each checkbox as shown below.

Set an input setting to use when the display is turned on. Selecting

No change

will keep the last

input setting.

Check whether the monitor On/Off Time settings are correct, and then click

Set

to save the

changes. You can see your display on/off schedule added under

On/ Off Time Schedule Info

On/Off Time Schedule Info

is used to check and manage the power on/off schedule of the display.

To delete the on/off schedule of the selected display, select a schedule (time) to delete, and then
click

Delete

. The on/off schedules of all selected displays are deleted.

To delete all schedules, select a list to delete, and then click

Delete All

. All the selected display

on/off times are deleted.

ENWW

Display configuration

2nd Draft

Содержание LD4210

































































































































































Результаты поиска

Содержание LD4210

Отзывы:

HP LD4210, Руководство пользователя, Страница: 80 / 160

Результаты поиска

Содержание LD4210

Отзывы: