HP LD4210 Скачать руководство пользователя страница 57

Страница: 57 / 160

Using Music List

Use

Music List

to play music files on a USB storage device.

NOTE:

If you do not select any button for a while, the play information box will float as a screen

saver. Press the OK button to stop the screen saver.

Information about using

Music List

MUSIC (*.MP3) supporting file—Purchased music files (*.MP3) might contain copyright
restrictions; playback of these files might not be supported.

Damaged or corrupted music does not play but displays 00:00 in playtime.

Bit rate 32 to 320kbps

Sampling rate MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz.

Music selection and menu options
The Play , Pause

, Stop , Reverse , and Forward buttons on the remote control are

also available to use when playing music.

Play

(during stop)—Play the selected music titles. Once playback of a piece of music finishes,

the next selected one will be played. When there are no selected music titles to play, the next
one in the current folder will be played. If you go to a different folder and press the OK button,
the current music in playback will stop.

Play Marked

—Play the selected music titles. Once a music finishes playing, the next selected

one will be played automatically.

Stop Play

(during stop)—Stop the playing music titles.

Play with Photo

—Start playing the selected music titles and then move to the

Photo List

Mark All

—Mark all music titles in the folder.

Delete

—Delete the selected music titles.

Close

—Close the pop-up menu.

Chapter 5 Using the HP Media Sign Player

ENWW

2nd Draft

Содержание LD4210

































































































































































Результаты поиска

Содержание LD4210

Отзывы:

HP LD4210, Руководство пользователя, Страница: 57 / 160

Результаты поиска

Содержание LD4210

Отзывы: