background image

 

Monitor features 

This chapter provides an overview of the monitor’s features. 

 

Features 

Depending on the model, your monitor might include the following features: 

 

68.47 cm (27-inch) diagonal viewable area with 2560 × 1440 resolution  

 

Tilt and height-adjustment capabilities  

 

One High-Definition Multimedia Interface (HDMI) video input  

 

One DisplayPort video input  

 

High-bandwidth Digital Content Protection (HDCP) used on all inputs  

 

USB hub with one upstream port and two downstream ports  

 

Audio-out (headphone) jack  

 

HDMI, DisplayPort, and USB Type-B–to–USB Type-A cables included  

 

Plug and Play capability if supported by your operating system  

 

OSD adjustments in 10 languages for easy setup and screen optimization  

 

Frames-per-second indicator displayed on the monitor screen, adjustable using 
the OSD menu  

 

Message timer displayed on the monitor screen, adjustable using the OSD 
menu  

 

Gaming crosshair displayed on the monitor screen, adjustable using the OSD 
menu  

 

Security cable slot on the rear of the monitor for an optional security cable  

 

User-configurable ambient lighting with full-range LEDs  

 

Convenient headphone storage hook on monitor stand  

 

VESA® mounting capability for attaching the display to a wall mount device or 
swing arm  

 

 

NOTE: 

For safety and regulatory information, refer to the Product Notices provided in 

your documentation kit. To locate updates to the user guide for your product, go to 
http://www.hp.com/support to download the latest versions of HP programs and 
drivers 

 

 

 

 

Содержание L55527-001


























Отзывы: