HP Kayak XU700, Техническое справочное руководство

Страница: 36 / 124

36
2 System Board
Memory Controller Hub (82850)
The following table shows the features that are available in the MCH Host
Bridge/Controller.
Feature Feature
•
Processor/System Bus:
❒
Supports on Pentium 4 processor at: 100 MHz System Bus
frequency (400 MHz Data Bus).
❒
Provides an 8-deep In-Order Queue supporting up to eight
outstanding transaction requests on the System bus.
❒
Desktop optimized AGTL+ bus driver technology with inte-
grated AGTL + termination resistors.
❒
Support for 32-bit System bus address.
•
Accelerated Graphics Port (AGP) Interface:
❒
Single 1.5V AGP PRO connector.
❒
AGP Rev 2.0 compliant, including AGP 4x data transfers and
2x/4x Fast Write protocol.
❒
AGP 1.5V connector support with 1.5 V signalling only.
❒
AGP PIPE
#
or SBA initiated accesses to DRAM is not
snooped
❒
AGP FRAME initiated accesses to DRAM are snooped
(snooper identifies that data is coherent in cache memory).
❒
Hierarchical PCI configuration mechanism.
❒
Delayed transaction support for AGP-to-DRAM reads that
cannot be serviced immediately.
•
Memory Controller.
Direct Rambus:
❒
Dual Direct Rambus Channels operating in lock-step (both
channels must be populated with a memory module).
Supporting 300 MHz or 400 MHz.
❒
RDRAM 128 Mb, 256 Mb devices.
❒
Minimum upgrade increment of 32 MB using 128 Mbit
DRAM technology.
❒
Up to 64 Direct Rambus devices.
Dual channel maximum memory array size is:
— 1 GB using 128 Mbit DRAM technology.
— 2 GB using 256 Mbit DRAM technology.
❒
Up to 8 simultaneous open pages:
— 1 KByte page size support for 128 Mbit and 256 Mbit
RDRAM devices.
— 2 KByte page size support for 256 Mbit RDRAM devices.
•
Hub Link 8-bit Interface to ICH2:
❒
High-speed interconnect between the MCH and ICH2
(266 MB/sec).