The HP 525-R is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/g/n/ac product. The Wi-Fi CERTIFIED Logo is a
certification mark of the Wi-Fi Alliance.
3
Power
ETH1(10
/100M)
ETH1(10
00M)
2.4G 5G
Description
remains orange after several
minutes, the software failed to
load.
Green,
flashing every
2 seconds
(0.5Hz)
Off
Off
Off
Off
The AP is starting up.
Green,
flashing every
1 second
(1Hz)
Off
Off
Off
Off
The AP is looking for an IP address
or building the list of VLANS on
which to perform discovery.
Power, Eth1 (10M/100M) and Eth1
(1000M) LEDs flashing green in
sequence
Off
Off
The AP has obtained an IP address
and is attempting to discover a
controller.
Green On
Eth1 (10M/100M) and
Eth1 (1000M) LEDs
flashing green
alternately
Off
Off
The AP has found a controller and
is attempting to establish a tunnel
with it.
Green On
Off
Off
Any
Any
The Ethernet interface is not
connected or there is no activity.
Green On
Green
On
Off
Any
Any
The Ethernet interface is active on
a valid 10/100Mbps copper link.
Green On
Off
Green
On
Any
Any
The Ethernet interface is active on
a valid 1000Mbps copper link.
Green On
Any
Any
Gree
n On
Any
The 2.4GHz Radio interface has
clients.
Green On
Any
Any
Any
Gree
n On
The 5GHz Radio interface has
clients.
Powering the HP 525-R
The HP 525-R can be powered by using a PoE injector, or a PoE-enabled
switch that supports 802.3at and provides 10/100 Mbps or 10/100/1000
Mbps Ethernet ports.
Before you connect power to the AP, verify that the power supply is
steady.