Troubleshooting
Basic Troubleshooting Tips
■
Improper Network Topologies.
It is important to make sure you have
a valid network topology. Common topology faults include excessive
cable length and excessive repeater delays between end nodes. If you have
network problems after recent changes to the network, change back to
the previous topology. If you no longer experience the problems, the new
topology is probably at fault. Some basic sample topologies are shown at
the end of chapter 2 in this manual.
In addition, you should make sure that your network topology contains
no data path loops
. Between any two end nodes, there should be only
one active cabling path at any time. Data path loops will cause broadcast
storms that will severely impact your network performance.
With your Series 4100gl Switches, if you wish to build redundant paths
between important nodes in your network to provide some fault toler
ance, you should enable
Spanning Tree Protocol
support on the switch.
This ensures that only one of the redundant paths is active at any time,
thus avoiding data path loops. Spanning Tree can be enabled through the
switch console, the web browser interface, or HP ProCurve Manager for
Hubs and Switches.
The Series 4100gl Switches also support
Trunking
, which allows multiple
network cables to be used for a single network connection without
causing a data path loop. See the
Management and Configuration Guide
that is on the documentation CD-ROM that came with your switch for
more information on Spanning Tree and on Trunking.
•
Trunking for the J4908A is accomplished differently than normal,
therefore you must follow these guidelines. Looking at the J4908A
physical port layout, it looks like this:
1
2
3
4
5
6
13 14 15
16
21
7
8
9
10 11
12
17
18 19
20
22
The trunking grouping is as follows:
Group1: 1-5, 7-11, 16
Group2: 6, 12-15, 17-22
Ports 21 and 22, which are the two Fiber links, are expected to be trunked
together. The following graphic depicts the proper trunking.
T
rou
blesh
oot
ing
4-2
Содержание J4861A
