HP J4861A, Руководство по установке и началу работы

Страница: 46 / 94

Getting Started With Switch Configuration
N o t e
By default, the switch is configured to acquire an IP address configuration
from a DHCP or Bootp server. To use DHCP/Bootp instead of the manual
method described in this chapter, see “DHCP/Bootp Operation” in the
Management and Configuration Guide that is on the documentation CD-
ROM that came with your switch.
Using the Switch Setup Screen
The quickest and easiest way to minimally configure the switch for manage­
ment and password protection in your network is to use a direct console
connection to the switch, start a console session, and access the Switch Setup
screen.
1. Using the method described in the preceding section, connect a terminal
device to the switch and display the switch console command (CLI)
prompt (the default display).
The CLI prompt appears displaying the switch model number:
HP Procurve Switch 4104GL#
2. At the prompt, enter the setup command to display the Switch Setup
screen. The following illustration shows the Setup screen with the default
settings.
Get
ting
S
ta
rte
d W
ith
S
w
it
ch
Co
nfi
gurati
o
n
3. Use the ïï ïïï key to select the Manager Password field and enter a manager
password of up to 16 characters.
3-2