HP J class 3, Дополнительное руководство

Страница: 20 / 28

planning your site
when your system arrives
Chapter 2 20
when your system arrives
See the hp visualization center sv6 Installation and User’s Guide for
more installation details. See
/opt/graphics/OpenGL/doc/sv/Troubleshoot.pdf for additional help.
These files are also available on the Recovery CD under /Docs/*.pdf.
1. Verify Your Hardware Setup
The systems will arrive fully configured. There are just a few physical
connections that have to be made after unpacking.
• Unpack racks
— Verify that boxes are undamaged before opening.
— Check the packing slip and verify that you received all
equipment on the list.
— Position the racks.
WARNING Before doing any further configuration, pull out or bolt on
the anti-tip plate at the bottom of each rack. Failure to do
so will pose a serious safety risk, as the rack could tip over.
• Connect Extras
— If you have multiple racks, connect them as indicated by the
labels on the disconnected cables.
— Power & I/O devices:
❏
See power, space, and cooling requirements in this
document.
❏
Plug in power for each rack.
❏
Attach keyboard and mouse to the system labeled Master.
❏
Attach the stereo emitter to the controller card of the
compositor (optional)
❏
Attach your display device to the output card of the
compositor via a standard analog monitor cable.
— Network