OA
The OA provides diagnostic and configuration capabilities. See the
HPE Integrity Superdome X and
Superdome 2 Onboard Administrator Command Line Interface Guide
for more information on the OA CLI
commands. You can access the OA CLI through the network.
The status logs consist of the following:
• System Event
• Forward Progress
• Live Events
Remotely accessing the OA
The OA CLI can be accessed remotely through any Telnet or SSH session.
Telnet session
Procedure
1.
From a network-connected client, open a command-line window.
2.
At the prompt, enter
telnet
<OA IP address>
, and then press
Enter
.
3.
For example,
telnet 192.168.100.130
.
4.
Enter a valid user name, and then press
Enter
.
5.
Enter a valid password, and then press
Enter
. The CLI command prompt appears.
6.
Enter commands for the OA.
7.
To end the remote access Telnet session, at the CLI command prompt, enter
Exit
,
Logout
, or
Quit
.
SSH session
1.
Start an SSH session to the OA.
2.
Enter
ssh -l
<username>
<IP-address>
.
Example:
ssh -l Administrator 16.113.xx.yy
The authenticity of host '16.113.xx.yy(16.113.xx.yy)' can't be established.
DSA key fingerprint is ab:5e:55:60:2b:71:8f:0c:55:3e:79:3e:a2:93:ea:13
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '16.113.xx.yy' (DSA) to the list of known hosts.
---------------------------------------------------------------------------
-------------
This is a private system. Do not attempt to login unless you are an
authorized user. Any authorized or unauthorized access and use may be
monitored and can result in criminal or civil prosecution under applicable
law.
---------------------------------------------------------------------------
-------------
Firmware Bundle Version: 5.73.0
Enclosure Number: 1
OA Number: 1
OA Role: Active
[email protected]'s password:
<Administrator password>
3.
At the CLI command prompt, enter OA commands.
4.
To end the remote access SSH session, at the CLI command prompt, close the communication
software or enter
Exit
,
Logout
, or
Quit
.
82
OA