HP Integrity BL890c - i2 Server, Руководство по установке

Страница: 40 / 52

Partner blade
bay location rules
in half-height
blade device
bays
Partner blade
support? Blade location
rules Supported
enclosures
Number of
conjoined
blades Scaleable
BladeLink part
number
Class
N/A No Bays 1, 2, 3, 4 or
5, 6, 7, 8 c7000 only 4 (BL890c
i2) AD399-60006 SBL4
N/A No Bays 1, 2, 3, 4 c3000 only 4 (BL890c
i2) AD399-60007
To install the Scaleable BladeLink:
1. Log on to the OA.
2. Install the first blade into the lowest bay number, this blade becomes the monarch blade
(
“Installing the server blade into the enclosure” ).
3. Wait 10 seconds. The IP address of the installed blade will appear in the OA.
4. Insert each adjacent blade, waiting 10 seconds between blades.
5. Using the OA, verify that the rest of the blades that will be conjoined have an IP address
and are powered off.
6. Remove the plastic protectors from the connectors on the back of the Scaleable BladeLink.
7. Push in the blue release latch on the handle to release the handle.
8. Pull the handle all the way out
9. Align the guide pins on the back of the Scaleable BladeLink to the holes on the front of the
server blades.
10. Fully insert the Scaleable BladeLink into the blades, and then close the handle.
11. Log into iLO on the monarch blade. For more information, see the HP Integrity iLO3 Operations
Guide.
12. In iLO, go to the Command Menu and execute
xd -r
to reboot iLOs in the conjoined set.
13. Still in the iLO Command Menu, power on the monarch blade with the
PC -on -nc
command. Powering on the monarch blade will power the entire conjoined system on.
14. Boot the monarch blade. Booting the monarch blade boots the entire conjoined system.
40 Installing the server blade into the enclosure