HP HPTouchSmart610, Руководство по модернизации и обслуживанию

Страница: 20 / 23

18
647642-001
— Upgrading or Replacing Memory
12 Use your fingers to press outwards on the retaining
clips at the left and right sides of the top memory
card (1) to release it. Holding the memory card by its
edges, remove it from the compartment (2).
13 If you need to remove additional memory cards,
repeat step12.
Installing a New Memory Card
1 Orient the new memory card so that the notch on the
edge of the card faces forward and is on the right.
2 If using two memory cards, they will go into the black
slots in the order shown. The first memory card goes
into a black slot (1), the second memory card goes
into a black slot (2).
NOTE: The replacement memory card may not look
exactly the same as the original drive due to different
manufacturers or models. Hewlett-Packard always provides
quality parts that meet or exceed your original computer
specifications.
IMPORTANT: If you are replacing more than one card,
you must replace cards into the two black slots first and
then into the two white slots.