HP HPE ProLiant ML30 Gen9, Руководство по техническому обслуживанию и ремонту

Страница: 62 / 101

The server will automatically reboot.
Replacing the system battery
WARNING:
The server contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery
that provides power to the real-time clock. If this battery is not properly handled, a risk of the fire and
burns exists. To reduce the risk of personal injury:
• Do not attempt to recharge the battery.
• Do not expose the battery to temperatures higher than 60°C (140°F).
• Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
• If the server no longer automatically displays the correct date and time, then replace the battery that
provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
• Replace only with the spare designated for this product.
IMPORTANT:
Replacing the system board battery resets the system ROM to its default configuration. After replacing
the battery, reconfigure the system through RBSU.
Procedure
1. Power down the server .
2. Disconnect the power cord from the power source and the server.
3. Remove the bezel .
4. Place the server on its side with the access panel facing up.
5. Remove the access panel .
6. Remove the air baffle .
7. Locate the battery on the system board .
8. Slightly push the metal tab, and then use the small flat-nose pliers to remove the system battery from its
socket.
9. Slightly push the metal tab, then install the system battery in the socket.
62 Replacing the system battery