manualshive.com logo in svg

HP HP-UX 11i, Руководство администратора

"HP HP-UX 11i" - это операционная система для серверов Hewlett Packard, предлагающая обширное руководство администратора. Скачайте бесплатное руководство для администратора с нашего сайта manualshive.com. Это официальное руководство поможет вам настроить и оптимизировать работу вашего сервера.

Поделиться
Скачать
background image

pvchange(1M)

Message Text

Unable to detach the path or physical volume via the pathname provided.
Either use pvchange(1M) -a N to detach the PV using an attached path
or detach each path to the PV individually using pvchange(1M) –a n

Cause

The specified path is not part of any volume group, because the path has not been successfully
attached to the otherwise active volume group it belongs to.

Recommended Action

Check the specified path name to make sure it is correct. If the error occurred while detaching a
physical volume, specify a different path. If it is not clear whether any path was attached before,
individually detach each path to the physical volume using

pvchange

with the

–a n

option.

Message Text

Warning: Detaching a physical volume reduces the availability
of data within the logical volumes residing on that disk.
Prior to detaching a physical volume or the last available path to it,
verify that there are alternate copies of the data available on other
disks in the volume group. If necessary, use pvchange(1M) to reverse
this operation.

Cause

This warning is advisory. It is generated whenever a path or physical volume is detached.

Recommended Action

None.

vgcfgbackup(1M)

Message Text

Invalid LVMREC on Physical Volume pvname

Cause

The LVM header on the disk is incorrect. This can happen when an existing LVM disk is overwritten
with a command like

dd

or

pvcreate

. If the disk is shared between two systems, one system

might not be aware that the disk is already in a volume group. The corruption can also be caused
by running

vgchgid

incorrectly when using BC split volumes.

Recommended Action

Restore a known good configuration to the disk using

vgcfgrestore

. Be sure to use a valid copy

dated before the first occurrence of the problem. For example:

# vgcfgrestore –n vgname pvname

vgcfgrestore(1M)

Message Text

Cannot restore Physical Volume pvname
Detach the PV or deactivate the VG, before restoring the PV.

166 Warning and Error Messages

Содержание HP-UX 11i

























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HP-UX 11i

Xerox FreeFlow Manual preview
FreeFlow
Бренд: Xerox Страницы: 18
F-SECURE INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61... Administrator'S Manual preview
INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61...
Бренд: F-SECURE Страницы: 414
ScanSoft TextBridge PRO 8.5 User Manual preview
TextBridge PRO 8.5
Бренд: ScanSoft Страницы: 243
Model Technology Model Sim EE Start Here Manual preview
Model Sim EE
Бренд: Model Technology Страницы: 37
Paradyne 8922 Installation And User Manual preview
8922
Бренд: Paradyne Страницы: 24
TRENDnet VIP-L16 - Installation Manual preview
VIP-L16 -
Бренд: TRENDnet Страницы: 21
Red Hat APPLICATION STACK 2.4 RELEASE Release Note preview
APPLICATION STACK 2.4 RELEASE
Бренд: Red Hat Страницы: 22
Polycom ConferenceSuite Brochure preview
ConferenceSuite
Бренд: Polycom Страницы: 2
Red Hat DEVICE-MAPPER MULTIPATH 5.2 Configuration And Administration Manual preview
DEVICE-MAPPER MULTIPATH 5.2
Бренд: Red Hat Страницы: 44
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 5.2
Бренд: Red Hat Страницы: 78
RSA Security RSA RADIUS Server 6.1 Administrator'S Manual preview
RSA RADIUS Server 6.1
Бренд: RSA Security Страницы: 118
UNIBLUE DRIVERSCANNER 2009 Manual preview
DRIVERSCANNER 2009
Бренд: UNIBLUE Страницы: 62
TomTom TomTom App Reference Manual preview
TomTom App
Бренд: TomTom Страницы: 58
DirekTronik Wireless Pocket USB User Manual preview
Wireless Pocket USB
Бренд: DirekTronik Страницы: 37
Autodesk 057B1-41A111-1001 - AutoCAD LT 2010 User Manual preview
057B1-41A111-1001 - AutoCAD LT 2010
Бренд: Autodesk Страницы: 574
Qlogic Fast Fabric User Manual preview
Fast Fabric
Бренд: Qlogic Страницы: 174
IBM AH0QXML - Lotus Domino Messaging User Manual preview
AH0QXML - Lotus Domino Messaging
Бренд: IBM Страницы: 120
Oki LP441s Manual preview
LP441s
Бренд: Oki Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды