manualshive.com logo in svg

HP HP 8753E, Руководство по обслуживанию, Страница: 452 / 612

Поделиться
Скачать
HP HP 8753E Скачать руководство пользователя страница 452

Al 

 Panel

The A1 front panel assembly provides user interface with the analyzer. It

includes the keyboard for local user inputs, and the front panel 

 that

indicate instrument status The RPG (rotary pulse generator) is not electrically

connected to the front panel, but provides user inputs directly to the front

panel processor.

 

 Panel Processor

The   front panel processor detects and decodes user inputs from the front

panel and the RPG, and transmits them to the CPU. It has the capability to

interrupt the CPU to provide information updates. It controls the front panel

 that provide status information to the user.

The   also contains the LVDS (low voltage differential signaling) receivers

which connect to the graphics processor. The received video signals are routed

to the 

 display.

 

 Digital IF

The   CPU assembly contains the main CPU (central processing unit), the

 signal processor, memory storage, and interconnect port interfaces

The main CPU is the master controller for the analyzer, including the other

dedicated microprocessors The memory includes EEPROM, DRAM, flash ROM,

SRAM and boot ROM.
Data from the receiver is serially clocked into the   CPU assembly from

the 

 digital IF’. The data taking sequence is triggered either from the

 

 assembly, externally from the rear panel, or by software on the

 assembly.

The main CPU is a 

 microprocessor that maintains 

 control over the

entire instrument through the instrument 

 The main CPU receives external

control information from the front panel or HP-IB, and performs processing

and formatting operations on the raw data in the main RAM. It controls the

digital 

 processor, the front panel processor, the display processor, and

the interconnect port interfaces. In addition, when the analyzer is in the

system controller mode, the main CPU controls peripheral devices through the

peripheral port interfaces

 

 Operation

Содержание HP 8753E





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов