manualshive.com logo in svg

HP HP 8753E, Руководство по обслуживанию, Страница: 373 / 612

Поделиться
Скачать
HP HP 8753E Скачать руководство пользователя страница 373

Self Diagnose 

. . . . . . . . . 

  . . .

 

 

   

 

 

   

 

 

 This 

 examines, in order, the pass/fail status of 

internal tests and displays NO FAILURE 

 if no tests have failed.

If a failure is detected, the routine displays the assembly or assemblies most

probably faulty and assigns a 

 probability factor to each assembly.

 Descriptions

The analyzer has up to 80 routines that test, verify, and adjust the instrument.

This section describes those tests.

Internal Tests

This group of tests runs without external connections or operator interaction.

All return a PASS or FAIL condition. All of these tests run on power-up and

PRESET except as noted.
0

ALL 

 

 only when selected. It consists of internal tests 3-11,

13-16, and 20. Use the front panel knob to scroll through the tests and

see which failed. If   pass, the test displays a PASS status. Each test

in the subset retains its own test status.

1

PRESET. 

Runs the following subset of internal tests: first, the

 tests 2, 3, and 4; then tests 5 through 11, 14, 15, and 16. If

any of these tests fail, this test returns a FAIL status. Use the front

panel knob to scroll through the tests and see which failed. If all pass,

this test displays a PASS status. Each test in the subset retains its own

test status. This same subset is available over HP-IB as “TST?“. It is not

performed upon remote preset.

2

ROM. Part of the 

 tests and 

 be 

 separately. Refer

to the “Digital Control Troubleshooting” chapter for more information.

Service Kay Menus and Error Messages 1 

Содержание HP 8753E





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов