background image

5

Graphics and printing

Graphic display and printout

Barchart (results v 1920 time
periods) for current or stored
measurement period. Showing,
for telecom: bit error count, code
error count, frame error count,
CRC error count, REBE (remote
end block error – E-bits) error
count, M2100 ES, SES count,
alarms;
or datacom, any of: bit error
count, block error count, alarms.

Bar resolution

: 1, 15, 60 minutes.

Printer and remote control
Connector:

 25-pin female

RS-232-C.

Printing:

 Results, time, date and

instrument control settings to
external printer.

Remote control: 

Full duplex

RS-232 control via a terminal or a
computer.

Results and settings
storage

Internal results storage

Automatic, for up to 10 periods
with a maximum of 80 days
capacity or total capacity of
approximately 5,000 events. Data
retained when instrument
switched off.

Results stored at end of
measurement period

Telecom and datacom error
results, ITU-T G.821/M.2100 error
analysis, alarm seconds.

Instrument settings storage

All current settings and results
saved when the instrument
switched off. In addition, up to
five complete telecom and five
complete datacom setups, with
names, stored for recall.

General

Dimensions mm (inch):

 190

(7.5) high, 340 (13.4) wide, 208
(8.2) deep including front panel
cover or datacom module.

Weight:

 HP 37722A 4.5 kg (10 lb);

HP 37732A 5.9 kg (12.5 lb).

ac Supply:

 90 to 260 V, 60 VA, 48

to 66 Hz.

Temperature:

 0 to 

+

50°C

operating, 

40 to 

+

70°C storage.

Telecom measurements

All measurements are simultaneous.

Errors

At 2048 kb/s have error count, average error ratio, error free
seconds, % error free seconds of: bit (64 and 2048 kb/s), code,
frame bit, CRC4, REBE (remote end block error – E bits).

ITU-T M.2100 analysis

ES, SES and availability for maintenance monitoring of transmit
and receive directions. Receive only for out-of-service testing
(includes PRBS defects and anomalies).

ITU-T G.821 error analysis

SES, %SES, ES, %ES, UAV and %UAV (telecom only), percent
availability (datacom only), US, DM, %DM, long term mean error
ratio. Also G.821 Annex D and user-defined thresholds.

Alarms

Alarm seconds and LED display of: AIS, LOS, LOF, CAS MFM
loss, CRC4 MFM loss, remote alarm, remote MFM alarm, pattern
sync loss, octet loss, power loss.

Frequency
Range:

 0 to 9 MHz.

Resolution:

 1 Hz.

Slips and COFAs

Number of pattern slips in available time and changes of frame
alignment (COFA) are detected and counted.

Round trip delay

For 2

23 

 1 PRBS at 2 Mb/s.

Range:

 0 to 1023 ms 

±

 3% (nominal).

Resolution:

 1 

µ

s.

Datacom measurements

All measurements are simultaneous.

Errors

Bit error count/ratio, block count (the block length
can be either 10

3

 bits or PRBS length), block error count/ratio,

asynchronous ES, %EFS, clock slips.

ITU-T M.2100 analysis

As for telecom measurements.

ITU-T G.821 error analysis

As for telecom measurements.

Alarms

Alarm seconds and LED display of: data loss, power loss,
pattern sync loss, clock slip.

Frequency

 

(synchronous mode only)

Range:

 0 to 2.048 MHz.

Resolution:

 1 Hz.

Control-circuit timing analysis

Graphic display of the status of control circuits RTS, CTS,
DTR, DSR, DCD and Mon (monitor in V.24 mode only).

Delay

Between user-defined start and stop events.

Start and stop events

: Transitions of RTS, CTS, DTR, DSR,

DCD and Mon (user-connected monitor point for V.24 only).

Ranges:

 100 ms, 1 s, 10 s.

Resolution

: 0.1 ms up to 1 s, 1 ms above 1 s.

Specifications common to the HP 37722A and 37732A analyzers

Telecom and datacom measurements

Содержание HP 37722A









Отзывы: