manualshive.com logo in svg

HP HP 242 G2, Руководство по техническому обслуживанию и ремонту, Страница: 47 / 125

Поделиться
Скачать
HP HP 242 G2 Скачать руководство пользователя страница 47

WLAN module

Description

Spare part number

Atheros AR9485 802.11b/g/n 1x1 WiFi Adapter

675794-001

Broadcom BCM943228 802.11abgn 2x2 Wi-Fi + Bluetooth 4.0 Combo Adapter

730668-001

Ralink RT3290LE 802.11b/g/n 1×1 WiFi and Bluetooth 4.0 Combo Adapter

690020-001

CAUTION:

To prevent an unresponsive system, replace the wireless module only with a wireless module

authorized for use in the computer by the governmental agency that regulates wireless devices in your

country or region. If you replace the module and then receive a warning message, remove the module to

restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the battery (see 

Battery on page 33

).

5.

Remove the hard drive service cover (see 

Hard drive on page 34

).

Remove the WLAN module:

1.

Disconnect the WLAN antenna cables 

(1)

 from the terminals on the WLAN module.

NOTE:

The WLAN antenna cable labeled “1” connects to the WLAN module “Main” terminal labeled

“1”. The WLAN antenna cable labeled “2” connects to the WLAN module “Aux” terminal labeled “2”.

2.

Remove the two Phillips PM2.0×2.0 screws 

(2)

 that secure the WLAN module to the system board. (The

WLAN module tilts up.)

Component replacement procedures

37

Содержание HP 242 G2






























































































































Отзывы:

Нет отзывов