HP G72-a00 - Notebook PC Скачать руководство пользователя страница 85

Страница: 85 / 127

Remove the disc

(3)

from the tray by gently pressing down on the spindle while lifting the outer

edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.

NOTE:

If the tray is not fully accessible, tilt the disc carefully as you remove it.

Close the disc tray, and then place the disc in a protective case.

A disc does not play automatically

Click

Start

Default Programs

Change AutoPlay Settings

Confirm that the

Use AutoPlay for all media and devices

check box is selected.

Click

Save

A CD, DVD, or BD should now start automatically when it is inserted into the optical drive.

A DVD movie stops, skips, or plays erratically

●

Clean the disc.

●

Conserve system resources by trying the following suggestions:

◦

Log off the Internet.

◦

Change the color properties of the desktop:

1. Right-click on a blank area of the computer desktop, and then select

Screen resolution

2. Select

Advanced Settings

Monitor

tab.

3. Select

High Color (16 bit)

, if this setting is not already selected.

Troubleshooting drive and device driver problems

Содержание G72-a00 - Notebook PC
































































































































Результаты поиска

Содержание G72-a00 - Notebook PC

Отзывы:

HP G72-a00 - Notebook PC, Руководство пользователя, Страница: 85 / 127

Результаты поиска

Содержание G72-a00 - Notebook PC

Отзывы: