manualshive.com logo in svg

HP G62-300 - Notebook PC, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP G62-300 - Notebook PC Скачать руководство пользователя страница 114

Using system restore points

When backing up the system, you are creating a system restore point. A system restore point allows
you to save and name a snapshot of your hard drive at a specific point in time. You can then recover
back to that point if you want to reverse subsequent changes made to the system.

NOTE:

Recovering to an earlier restore point does not affect data files saved or e-mails created

since the last restore point.

You also can create additional restore points to provide increased protection for the system files and
settings.

When to create restore points

●

Before you add or extensively modify software or hardware

●

Periodically, whenever the system is performing optimally

NOTE:

If you revert to a restore point and then change your mind, you can reverse the restoration.

Create a system restore point

1.

Select 

Start

 

>

 

Control Panel

 

>

 

System and Security

 

>

 

System

.

2.

In the left pane, click 

System Protection

.

3.

Click the 

System Protection

 tab.

4.

Under 

Protection Settings

, select the disk for which you want to create a restore point.

5.

Click 

Create

.

6.

Follow the on-screen instructions.

Restore to a previous date and time

To revert to a restore point (created at a previous date and time), when the computer was functioning
optimally, follow these steps:

1.

Select 

Start

 

>

 

Control Panel

 

>

 

System and Security

 

>

 

System

.

2.

In the left pane, click 

System protection

.

3.

Click the 

System Protection

 tab.

4.

Click 

System Restore

.

5.

Follow the on-screen instructions.

Performing a recovery

NOTE:

You can recover only files that you have previously backed up. HP recommends using

Recovery Manager to create an entire drive backup as soon as you set up the computer.

Recovery Manager software allows you to repair or restore the system if you experience system
failure or instability. Recovery Manager works from recovery discs or from a dedicated recovery
partition (select models only) on the hard drive. However, if the computer includes a solid-state drive

104 Chapter 7   Backup and recovery

Содержание G62-300 - Notebook PC








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды