HP G08 Скачать руководство пользователя страница 270

Страница: 270 / 326

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-18

Cause.

The specified text for the HISTORY, !, or ? command was not found in the

buffer.

Effect.

None.

Recovery.

Enter the correct text and try the command again.

Cause.

The attempted command specified a nonexistent node.

Effect.

None.

Recovery.

Reenter the command with a valid node name.

Cause.

The SAVEALL, SAVEID, or SOURCEDATE option of DUP was specified, and

an error occurred while saving one or more of the relevant attributes.

Effect.

The DUP command finishes successfully, but not all the attributes are

transferred.

Recovery.

Check which attributes did not transfer and transfer manually (if

necessary).

Cause.

The attempted command was not allowed for partitioned files. For example, an

attempt was made to duplicate a partitioned file, specifying the OLD option without the
PARTONLY option.

Effect.

The command fails.

Recovery.

Check which commands are allowed with partitioned files.

Cause.

The source file of a BUILDKEYRECORDS command or the destination file of

a LOAD command was an unstructured file.

Effect.

The command fails.

Recovery.

Specify a structured file in the command.

Cause.

A character was entered on the same line after the continuation character (&).

Effect.

The command fails.

NO SUCH SYSTEM

NOT ALL ATTRIBUTES WERE TRANSFERRED

NOT ALLOWED FOR PARTITIONED FILES

NOT ALLOWED FOR THIS FILE TYPE

NOT ALLOWED HERE

Содержание G08







































































































































































































































































































































Результаты поиска

Содержание G08

Отзывы:

Бренды по названию

Популярные бренды

HP G08, Справочное руководство

Результаты поиска

Содержание G08

Отзывы:

Бренды по названию

Популярные бренды