HP G08 Скачать руководство пользователя страница 262

Страница: 262 / 326

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-10

Recovery.

Retry the command after correcting the errors. If the file was being updated

concurrently, the error might be only a transient structure problem FUP encountered
while reading large blocks.

Cause.

A file-system error occurred.

filename

indicates the name of the file that

FUP was attempting to process.

Effect.

The operation fails.

Recovery.

For corrective action for the file-system error number indicated by

nnn

see the

Guardian Procedure Errors and Messages Manual

Cause.

A LISTOPENS command that specified a device other than a disk was

attempted when FUP expected a disk device name.

Effect.

The command fails.

Recovery.

Correct the name of the LISTOPENS object and retry the command.

Cause.

A LISTOPENS command that specified a disk device name was attempted

when FUP expected a nondisk device name.

Effect.

The LISTOPENS command terminates.

Recovery.

Correct the name of the LISTOPENS object and retry the command.

Cause.

Corrupted data was encountered in some internal structures.

Effect.

The command might not execute.

Recovery.

This message should never appear. If it does, contact your service

provider.

Cause.

The source and destination files of a DUP...,OLD command are incompatible.

Effect.

The attempted duplication fails.

ERROR - filename: ERR nnn

EXPECTED A DISK DEVICE

EXPECTED A NON-DISK DEVICE

EXTENT SIZE SPECIFIED AS RECS/EXTENT FOR UNSTR. FILE

FILE INCOMPATIBLE

Содержание G08







































































































































































































































































































































Результаты поиска

Содержание G08

Отзывы:

Бренды по названию

Популярные бренды

HP G08, Справочное руководство

Результаты поиска

Содержание G08

Отзывы:

Бренды по названию

Популярные бренды