86
Traffic filtering configuration example
Network requirements
As shown in
, configure traffic filtering to filter the packets with source port not being 21, and
received on GigabitEthernet 1/0/1.
Figure 31 Network diagram
Configuration procedure
# Create advanced ACL 3000, and configure a rule to match packets whose source port number is
not 21.
<Router> system-view
[Router] acl number 3000
[Router-acl-adv-3000] rule 0 permit tcp source-port neq 21
[Router-acl-adv-3000] quit
# Create a class named
classifier_1
, and use ACL 3000 as the match criterion in the class.
[Router] traffic classifier classifier_1
[Router-classifier-classifier_1] if-match acl 3000
[Router-classifier-classifier_1] quit
# Create a behavior named
behavior_1
, and configure the traffic filtering action to drop packets.
[Router] traffic behavior behavior_1
[Router-behavior-behavior_1] filter deny
[Router-behavior-behavior_1] quit
# Create a policy named
policy
, and associate class
classifier_1
with behavior
behavior_1
in the
policy.
[Router] qos policy policy
[Router-qospolicy-policy] classifier classifier_1 behavior behavior_1
[Router-qospolicy-policy] quit
# Apply the policy named
policy
to the incoming traffic of GigabitEthernet 1/0/1.
[Router] interface gigabitethernet 1/0/1
[Router-GigabitEthernet1/0/1] qos apply policy policy inbound
Содержание FlexNetwork 6600
Страница 106: ...99 Rule s If match acl 2000 Behavior behavior_1 Accounting Enable 28529 Packets ...
Страница 146: ...139 Figure 53 Implementing HQoS through interface level hierarchical CAR ...
Страница 147: ...140 ...