199
Step Command
Remarks
4.
Set the minimum password
length.
password-control length
length
•
In non-FIPS mode, the default
setting is 10 characters.
•
In FIPS mode, the default length
is 15 characters.
5.
Configure the password
composition policy.
password-control composition
type-number
type-number
[
type-length
type-length
]
•
In non-FIPS mode, by default, a
password must contain at least
one character type and at least
one character for each type.
•
In FIPS mode, by default, a
password must contain at least
four character types and at
least one character for each
type.
6.
Configure the password
complexity checking policy.
password-control complexity
{
same-character
|
user-name
}
check
By default, the system does not
perform password complexity
checking.
7.
Set the maximum number of
history password records for
each user.
password-control history
max-record-num
The default setting is 4.
8.
Specify the maximum number
of login attempts and the
action to be taken when a
user fails to log in after the
specified number of attempts.
password-control login-attempt
login-times
[
exceed
{
lock
|
lock-time
time
|
unlock
} ]
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for 1
minute before trying again.
9.
Set the number of days during
which a user is notified of the
pending password expiration.
password-control
alert-before-expire
alert-time
The default setting is 7 days.
10.
Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
password-control
expired-user-login delay
delay
times
times
By default, a user can log in three
times within 30 days after the
password expires.
11.
Set the maximum account idle
time.
password-control login idle-time
idle-time
The default setting is 90 days.
Setting user group password control parameters
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a user group and enter
user group view.
user-group
group-name
By default, no user group exists.
For information about how to
configure a user group, see
."
3.
Configure the password
expiration time for the user
group.
password-control aging
aging-time
By default, the password
expiration time of the user group
equals the global password
expiration time.
