142
3.
Add a portal device:
a.
Select
User Access Manager
>
Portal Service Management
>
Device
from the navigation tree to
enter the portal device configuration page.
b.
Click
Add
c.
Enter the device name
NAS
.
d.
Enter the IP address of the switch's interface connected to the host.
e.
Enter the key, which must be the same as that configured on the switch.
f.
Set whether to enable IP address reallocation.
This example uses direct portal authentication, and therefore select
No
from the
Reallocate IP
list.
g.
Select whether to support sever heartbeat and user heartbeat functions.
In this example, select
No
for both
Support Server Heartbeat
and
Support User Heartbeat
.
h.
Click
OK
.
Figure 48
Adding a portal device
4.
Associate the portal device with the IP address group:
a.
As shown in
, click the icon in the
Port Group Information Management
column of
device
NAS
to enter the port group configuration page.
b.
Click
Add
c.
Enter the port group name.
d.
Select the configured IP address group.
The IP address used by the user to access the network must be within this IP address group.
e.
Use the default settings for other parameters.
f.
Click
OK
.
