HP FB101AA - iPAQ Pocket PC Hx2490c Скачать руководство пользователя страница 143

Страница: 143 / 151

Declaration of Conformity for products marked with the

FCC logo—United States only

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.
For questions regarding your product, contact:

Hewlett-Packard Company

P. O. Box 692000, Mail Stop 530113

Houston, Texas 77269-2000

Or, call 1-800-652-6672
For questions regarding this FCC declaration, contact:

Hewlett-Packard Company

P. O. Box 692000, Mail Stop 510101

Houston, Texas 77269-2000

Or, call (281) 514-3333
To identify this product, refer to the Part, Series, or Model number found

on the product.

Canadian Notice

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

European Union Regulatory Notice

This product complies with the following EU Directives:

•

Low Voltage Directive 73/23/EEC

•

EMC Directive 89/336/EEC

NOTE:

CE Compliance of this equipment is valid only if powered with

an HP-provided and CE marked AC adapter.

Содержание FB101AA - iPAQ Pocket PC Hx2490c
























































































































































Результаты поиска

Содержание FB101AA - iPAQ Pocket PC Hx2490c

Отзывы:

HP FB101AA - iPAQ Pocket PC Hx2490c, Дополнительная информация, Страница: 143 / 151

Результаты поиска

Содержание FB101AA - iPAQ Pocket PC Hx2490c

Отзывы: