HP FB101AA - iPAQ Pocket PC Hx2490c Скачать руководство пользователя страница 102

Страница: 102 / 151

100

Tap the

Send

icon.

Tap the device where you want to send your business card.

Tap

OK.

NOTE:

Be sure the receiving device has been enabled to accept the

transfer.

If other devices do not receive your correct business card information, try

the following:

•

Be sure you have correctly set up your business card information in

Bluetooth Settings.

•

Check

Bluetooth Settings

to be sure you have not restricted this

function.

Requesting Business Cards

From the

Today

screen, tap the

iPAQ Wireless

icon.

Tap the

Bluetooth

icon to turn Bluetooth on.

Tap the

Manager

button

Menu

> Business Card

Exchange.

Tap the

Request

icon.

Tap the device from which you want to request a business card.

Tap

OK.

Exchanging Business Cards

You can exchange business card information with another device. If

available, the device’s information will be sent directly into your

Contacts

list in

Outlook Mobile.

To exchange business cards:

From the

Today

screen, tap the

iPAQ Wireless

icon.

Tap the

Bluetooth

icon to turn Bluetooth on.

Tap the

Manager

button

Menu

> Business Card

Exchange.

Continued

Содержание FB101AA - iPAQ Pocket PC Hx2490c
























































































































































Результаты поиска

Содержание FB101AA - iPAQ Pocket PC Hx2490c

Отзывы:

HP FB101AA - iPAQ Pocket PC Hx2490c, Дополнительная информация, Страница: 102 / 151

Результаты поиска

Содержание FB101AA - iPAQ Pocket PC Hx2490c

Отзывы: