20 English
English
Resolving Problems
If you experience problems using the HP Fast
RAID
option, check that:
1
The ARO-1130 adapter BIOS sign-on message appear
during bootup? If not, check that the ARO-1130 adapter is properly
seated in the RAID
port
slot.
2
All SCSI bus cables and power cables are connected.
If you are having trouble booting from the Fast
RAID
array:
1
Check the settings in the HP
Setup
program that the Array1000
Family Raid Adapter is selected in position one. To do this:
a
From the HP Setup program, select the
Boot
menu group, then
the
Hard Disk Drive
item. If the Array1000 Family Raid Adapter
is already in position one, then no changes are necessary.
Otherwise, select the Array1000 Family Raid Adapter by using
the up and down arrows, then press the
+
key to move it up the
list. Save your changes before you exit the
Setup
program.
2
Check that the array has been selected as the boot device using the
Array
Config
utility:
a
Insert the Array
Config
utility disk in drive A.
b
Reboot your computer and when the Array
Config
Main menu
appears, select
Display Boot Order.
If the array is at the top of the
list, preceded by the words Unit 0, no changes are necessary.
Otherwise, highlight the array name and press
, then
use the arrow keys to move it to the top of the list.
c
Exit the Array
Config
utility and reboot your computer.
3
Check the HP Setup settings to make sure that each drive has a
unique SCSI ID.