English
English 11
Using Custom Setup
To create an array using Custom Setup, you will need to do
the following:
NOTE
You can also perform most of these advanced options with the HP RAID
Device Manager once you’ve completed the installation and the HP
RAID Device Manager has been installed. Refer to the HP RAID Device
Manager’s online Help for more information on using this utility.
1
Insert the Array
Config
diskette in drive A and reboot your
computer. Wait until Array
Config
starts automatically.
2
Read the text that appears on the initial Array
Config
screens. Press
any key to view the next screen, or press
to return to the
previous screen.
3
When you see the Setup Type Selection Menu, select
Custom Setup
.
Then wait while Array
Config
scans your system for information
about your host adapter and SCSI devices.
4
When the Main Menu appears, select
Disk Array Operations
.
5
Select
Create New Array
from the Disk Array Operations menu.
6
Type a name for the array and press
. The name can be up
to 15 characters long and can include spaces and any other printable
characters.
7
Select an array type from the following options:
•
RAID 0: Data is striped across the disks in a RAID 0 array,
allowing for faster data input and output than a single disk.
RAID 0 arrays do not store redundant data; if any disk in the array
fails, all data is lost.
•
RAID 1: Data is mirrored on one pair of disks. If one disk fails, data
is still safe. The actual usable data capacity of the array equals
half the available disk space.