HP EliteBook 725 G4 Скачать руководство пользователя

Страница: 59 / 101

Removal and replacement procedures for
Authorized Service Provider parts

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.

CAUTION:

Components described in this chapter should only be accessed by an authorized service provider.

Accessing these parts can damage the computer or void the warranty.

CAUTION:

This computer does not have user-replaceable parts. Only HP authorized service providers should

perform the removal and replacement procedures described here. Accessing the internal part could damage
the computer or void the warranty.

Component replacement procedures

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty,

are on the service tag at the bottom of your computer. See

Service label on page 16

for details.

NOTE:

HP continually improves and changes product parts. For complete and current information on

supported parts for your computer, go to

http://partsurfer.hp.com

, select your country or region, and then

follow the on-screen instructions.

There are as many as 29 screws that must be removed, replaced, and/or loosened when servicing Authorized
Service Provider only parts. Make special note of each screw size and location during removal
and replacement.

System board

NOTE:

All system board spare part kits include an AMD processor and replacement thermal material.

Description

Spare part number

Equipped with an AMD A12-9800B processor and the Windows 10 operating system

911738-601

Equipped with an AMD A12-9800B processor and a non-Windows operating system

911738-001

Equipped with an AMD A12-8830B processor and the Windows 10 operating system

911740-601

Equipped with an AMD A12-8830B processor and a non-Windows operating system

911740-001

Equipped with an AMD A10-8730B processor and the Windows 10 operating system

911739-601

Equipped with an AMD A10-8730B processor and a non-Windows operating system

911739-001

Equipped with an AMD A8-9600B processor and the Windows 10 operating system

911737-601

Equipped with an AMD A8-9600B processor and a non-Windows operating system

911737-001

Before removing the system board, follow these steps:

Component replacement procedures

Содержание EliteBook 725 G4






































































































Результаты поиска

Содержание EliteBook 725 G4

Отзывы:

Похожие инструкции для EliteBook 725 G4

Бренды по названию

Популярные бренды

HP EliteBook 725 G4, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание EliteBook 725 G4

Отзывы:

Похожие инструкции для EliteBook 725 G4

Бренды по названию

Популярные бренды