HP E4510-48G, Справочник по командам

Страница: 660 / 1334

2-13
Examples
# Set the IP address for the device to use as the source address of the RADIUS packets to
129.10.10.1.
<Sysname> system-view
[Sysname] radius nas-ip 129.10.10.1
radius scheme
Syntax
radius scheme radius-scheme-name
undo radius scheme radius-scheme-name
View
System view
Default Level
3: Manage level
Parameters
radius-scheme-name : RADIUS scheme name, a case-insensitive string of 1 to 32 characters.
Description
Use the radius scheme command to create a RADIUS scheme and enter RADIUS scheme view.
Use the undo radius scheme command to delete a RADIUS scheme.
By default, no RADIUS scheme is defined.
Note that:
z
The RADIUS protocol is configured scheme by scheme. Every RADIUS scheme must at least
specify the IP addresses and UDP ports of the RADIUS authentication/authorization/accounting
servers and the parameters necessary for a RADIUS client to interact with the servers.
z
A RADIUS scheme can be referenced by more than one ISP domain at the same time.
z
You cannot remove the RADIUS scheme being used by online users with the undo radius
scheme command.
Related commands: key , retry realtime-accounting , timer realtime-accounting ,
stop-accounting-buffer enable , retry stop-accounting , server-type , state , user-name-format ,
retry , display radius scheme , display radius statistics .
Examples
# Create a RADIUS scheme named radius1 and enter RADIUS scheme view.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1]