HP E3472A Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 153

HP E3472A Скачать руководство пользователя страница 1

A

Dear Customer:

You have probably heard from news reports and from your sales representative that
as of November 1, 1999, four of Hewlett-Packard's businesses became a new
company -- Agilent Technologies. The new company includes the following former
HP businesses: test and measurement, semiconductor products, healthcare
solutions and chemical analysis."

We at Agilent Technologies are working diligently to make this transition as
seamless as possible for you, however, we are not able to make all changes
immediately. As a result, the products and related documentation may be labeled
with either the Hewlett-Packard name and logo or the Agilent Technologies name
and logo. Rest assured that whatever logo you see, the information, products and
services come from the same reliable source.

In addition, it is our sincere intent that the transition from Hewlett Packard to
Agilent Technologies should have no impact on your warranties, service levels, or
purchase volume credits.

For more information about this transition, please visit our website at:
http://www.agilent.com, or

contact your local sales representative. It has been our

pleasure to work with you for the past 60 years as part of Hewlett-Packard. We look
forward to continuing to serve you as Agilent Technologies for years to come.

1
2
3
...
»

Содержание E3472A


























































































































































Отзывы:

Нет отзывов