HP E2492A, Руководство по установке

Страница: 26 / 33

Power requirements
The probe adapter draws a maximum 100 mA @ 5V, which is supplied by the
logic analyzer.
CAT I, Pollution degree 2.
Cleaning
Remove any dust or debris from the probe adapter with precision dusting
cleaner (otherwise known as inert dusting gas or compressed air).
Replaceable parts
The repair strategy for this probe is product replacement. However, the
following table lists some mechanical parts that may be replaced if they are
damaged or lost. Contact your nearest Hewlett-Packard Sales Office for
further information on servicing the board.
Exchange assemblies are available when a repairable assembly is returned to
Hewlett-Packard. These assemblies have been set up on the "Exchange
Assembly" program. This allows you to exchange a faulty assembly with one
that has been repaired, calibrated, and performance verified by the factory.
The cost is significantly less than that of a new assembly.
Replaceable Parts
HP Part Number Description
E2492-60001 Probe Head
E2466-61201 Bottom Clamp
E2492-60002 Interposer
E2492-68501 Fan and Heat Sink Assembly
E2492-61101 Front-side Cache Heat Sink Assembly (slot 2 only)
E2492-61102 Back-side Cache Heat Sink Assembly (slot 2 only)
E2464-23101 Accessory Kit (includes card guides and spring clamps)
Power requirements
25