HP E2492A, Руководство по установке

Страница: 23 / 33

13
Connect the heat sink fan to the appropriate power sources.
In the illustration below, the top four power leads r5 Volts and the
bottom power lead pair re12 Volts. For all lead sets, the black wire is
ground, and the red wire is positive. To protect your target system, ensure
the fans are running whenever the target system is powered.
C A U T I O N
Failure to connect the fans to the appropriate power source will damage the
fans, and could cause overheating.
Slot 2 Heat Sink Power Requirements
To connect to the slot 2 Deschutes target system
22