manualshive.com logo in svg

HP DreamColor Z27x, Руководство пользователя

Поделиться
Скачать
HP DreamColor Z27x Скачать руководство пользователя страница 19

6.

Connect one end of the power cord to the AC power connector on the back of the monitor, and

the other end to an electrical wall outlet.

NOTE:

The master power switch on the rear of the monitor must be in the On position before

pressing the power button on the front of the monitor.

WARNING!

To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the computer by unplugging the power cord from the AC outlet.
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded

(earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a

2-pin adapter. The grounding pin is an important safety feature.
For your safety, do not place anything on power cords or cables. Arrange them so that no one

may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from

the electrical outlet, grasp the cord by the plug.

Connecting the Cables 11

Содержание DreamColor Z27x








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды