manualshive.com logo in svg

HP DL385 - ProLiant - G5, Руководство пользователя

Поделиться
Скачать
HP DL385 - ProLiant - G5 Скачать руководство пользователя страница 50

50 

 HP ProLiant DL385 Server User Guide 

 

 

Rack warnings 

  WARNING:  To reduce the risk of personal injury or 

damage to the equipment, be sure that: 

•

 

The leveling jacks are extended to the floor. 

•

 

The full weight of the rack rests on the leveling jacks. 

•

 

The stabilizing feet are attached to the rack if it is a single-rack 
installation.  

•

 

The racks are coupled together in multiple-rack installations.  

•

 

Only one component is extended at a time. A rack may become 
unstable if more than one component is extended for any 
reason. 

 

  WARNING:  To reduce the risk of personal injury or 

equipment damage when unloading a rack: 

•

 

At least two people are needed to safely unload the rack from 
the pallet. An empty 42U rack can weigh as much as 115 kg 
(253 lb), can stand more than 2.1 m (7 ft) tall, and may become 
unstable when being moved on its casters. 

•

 

Never stand in front of the rack when it is rolling down the ramp 
from the pallet. Always handle the rack from both sides. 

 

  WARNING:  Components can be very heavy. To reduce the 

risk of personal injury or damage to the equipment: 

Содержание DL385 - ProLiant - G5















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды