HP DL320 - ProLiant - G3 Скачать руководство пользователя страница 99 | Manualshive

Страница: 99 / 119

HP DL320 - ProLiant - G3 Скачать руководство пользователя страница 99

Regulatory

compliance

notices

99

Class B equipment

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit that is different from that to
which the receiver is connected.

•

Consult the dealer or an experienced radio or television technician for help.

Declaration of conformity for products marked with
the FCC logo, United States only

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

For questions regarding this product, contact us by mail or telephone:

•

Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000

•

1-800-HP-INVENT (1-800-474-6836). (For continuous quality
improvement, calls may be recorded or monitored.)

For questions regarding this FCC declaration, contact us by mail or telephone:

«
...
97
98
99
100
101
...
»

Содержание DL320 - ProLiant - G3
























































































































Отзывы:

Нет отзывов