HP DL320 - ProLiant - G3 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 119

HP DL320 - ProLiant - G3 Скачать руководство пользователя страница 2

© Copyright 2004, 2005 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice. The only warranties for HP products
and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.

Microsoft, Windows, and Windows NT are U.S. registered trademarks of Microsoft Corporation.

Linux is a U.S. registered trademark of Linus Torvalds.

March 2005 (Second Edition)
Part Number 374263-002

Audience assumptions

This document is for the person who installs, administers, and troubleshoots servers and storage
systems. HP assumes you are qualified in the servicing of computer equipment and trained in
recognizing hazards in products with hazardous energy levels.

«
1
2
3
4
...
»

Содержание DL320 - ProLiant - G3
























































































































Отзывы:

Нет отзывов