HP Desktop Pro A G2 Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 118

background image

Table 6-3

Computer Setup–Configuration menu (continued)

Option

Heading

CAUTION:

SATA emulation changes may prevent access to existing hard drive data and degrade or

corrupt established volumes.

RAID - Allows DOS and boot access to RAID volumes. Use this mode with the RAID device driver loaded in
the operating system to take advantage of RAID features.

AHCI Mode (default option) - Allows operating systems with AHCI device drivers loaded to take advantage
of more advanced features of the SATA controller.

NOTE:

The RAID/AHCI device driver must be installed prior to attempting to boot from a RAID/ AHCI

volume. If you attempt to boot from a RAID/AHCI volume without the required device driver installed, the
system will crash (blue screen). RAID volumes may become corrupted if they are booted to after disabling
RAID.

POST Messages

Enable or disable POST error messages during boot.

After Power Loss

Configure what the computer does when power is restored a power loss.

■

Power off—causes the computer to remain powered off when power is restored.

■

Power on—causes the computer to power on automatically as soon as power is restored.

■

Previous state—causes the computer to power on automatically as soon as power is restored, if it
was on when power was lost.

NOTE:

If the system is configured to ‘Power On from Keyboard Ports’ (see Power Management Options),

then this setting is forced to ‘Power On’.

Remote Wakeup Boot
Source

Select the devices that the computer can boot from, when woken up remotely, including a local hard drive
or a remote server.

Wake On LAN Power-On
Password Policy

Set whether a power-on password is required with wake on LAN.

BIOS Power On

Enable or disable the days of the week to turn the system on. This feature wakes the computer up from a
powered off state..

Num Lock State at
Power-On

Set the num lock state after POST to on or off.

S4/S5 Wake On LAN

Control whether the computer can wake from S4 (hibernation) or S5 (soft power off) state if a magic
packet is received by the NIC.

Device Options

Enable or disable the following devices:

●

Serial Port

Changes the resource of the serial port or hides the serial port from the operating system.

●

Integrated Video

●

Multi-Processor

Use this option to disable multi-processor support under the operating system. Default is enabled.

●

PCI SERR# Generation

Allows PCI devices to report PCI/PCIe System Error signals, such as address parity errors, data parity
errors, and critical errors other than parity. Default is enabled.

●

PCI VGA Palette Snooping

PCI Graphics
Configuration

Lists all available video devices installed in the computer for the selection of the primary video device.

Thermal

View the processor fan speed and set whether the processor fan status check function is enabled or
disabled.

Computer Setup (F10) Utilities

77

«
...
83
84
85
86
87
...
»

Содержание Desktop Pro A G2























































































































Отзывы:

Нет отзывов

Похожие инструкции для Desktop Pro A G2

Бренд: IBM Страницы: 86

POWERMATE ES 5250 - S

Бренд: NEC Страницы: 18

POWERMATE VT 300 RELEASE NOTES

Бренд: NEC Страницы: 16

POWERMATE CT 815 - RELEASE NOTES

Бренд: NEC Страницы: 155

Бренд: NEC Страницы: 6

POWERMATE ES Series

Бренд: NEC Страницы: 132

POWERMATE ES Series

Бренд: NEC Страницы: 8

Бренд: NEC Страницы: 167

Бренд: NEC Страницы: 1

Toughbook CF-28 Series

Бренд: Panasonic Страницы: 12

Бренд: IBM Страницы: 252

Бренд: A1Touch Страницы: 9

Бренд: Fluidwell Страницы: 52

CYRAQ PPC Series

Бренд: CyberResearch Страницы: 103

IntelliStation Z Pro

Бренд: IBM Страницы: 2

Бренд: Aaeon Страницы: 44

Power Panel 300

Бренд: B&R Industries Страницы: 612

Бренд: Alienware Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды