4-24
Compaq Professional Workstation AP550 Maintenance and Service Guide
Table 4-12
Computer Setup
continued
Task
Computer Setup Selection
Set the power button configuration (on/off or
suspend/wakeup) and enable/disable power LED
blink-in-suspend mode.
NOTE:
This selection does not appear if the energy
saver mode is disabled.
Select Power
, then select Energy Saver Options.
Enable the Power-On Password.
Select Security
, then select Power-On Password.
Enable/disable network server mode.
NOTE:
This selection appears only if a Power-On
Password is set.
Select Security
, then select Password Options.
Enable the Setup (administrator) Password.
Select Security
, then select Setup Password.
Enable/disable serial, parallel, and USB ports and
audio security.
Select Security
, then select Device Security.
Set the Asset Tag.
Select Security
, then select System IDs.
Set the keyboard locale setting (for example, English
or German) for the System ID entry. Also allows
setting of Chassis serial number if current number is
invalid.
Select Security
, then select System IDs.
Set the POST mode (QuickBoot) and enable/disable
POST messages.
Select Advanced
, then select Power-On Self Test.
Set resources for onboard system devices (serial
port, parallel port, and so forth).
Select Advanced, then select Onboard Devices.
View the currently installed PCI devices and their IRQ
settings and/or reconfigure IRQ settings for these
devices or disable them entirely.
NOTE:
This option will not appear if there are
non-PnP devices currently installed.
Select Advanced, then select PCI devices.
View the current settings of Plug and Play (PnP)
devices and set resources for installed boards.
Select Advanced, then select PCI PnP Devices.
Enable/disable PCI bus mastering, PCI reset on warm
boot, and PCI VGA palette snooping.
Select Advanced, then select Bus Options.
Set the printer mode (flexible/standard).
Select Advanced, then select Device Options.
Set the
Num Lock
state at power-on.
Select Advanced, then select Device Options.
Specify which VGA controller is the primary (or boot)
VGA controller.
NOTE:
This selection appears only if there are
multiple PCI graphics controllers in your system.
Select Advanced, then select PCI VGA Configuration.
continued
Содержание Deskpro AP550
Страница 7: ...135618 001 7 Air Baffle Assembly ...
Страница 8: ...Compaq Professional Workstation AP550 Maintenance and Service Guide ...
Страница 199: ...158279 001 135618 001 ...