background image

Troubleshooting

Step 2: Check the Driver Installation

36

English

Step 2: Check the Driver Installation

In this step, check that the modem driver is correctly 
installed. To do this, verify the resources allocated to the 
modem. There are two different areas to check.

In Windows 95 and Windows 98

1

Click the 

Start

 button then click 

Settings

 

Control 

Panel

.

2

Double-click the 

System

 icon.

3

Click the 

Device Manager

 tab.

4

Double-click 

Modem 

in the list.

5

Select

 HP Fast Modem with V90 

then click the 

Properties

 button.

Under

 Device Status

, there should be written 

This 

device is working properly

. If this is not the case, 

then the driver is incorrectly installed (refer to  “If the 
Driver is Incorrectly Installed” on page 37).

Click 

Cancel

.

6

In the 

Control Panel

, double-click the 

Modems

 icon.

7

In the 

Modem Properties

 dialog box, select the 

Diagnostics

 tab. Your HP Fax Modem should be allocated 

to one of the COM ports. 

If this is not the case, the driver is incorrectly installed 
(refer to  “If the Driver is Incorrectly Installed” on page 
37).

modem.bk : modem3.fb4  Page 36  Thursday, November 26, 1998  5:21 PM

Содержание D7808A



















































Отзывы: