HP CW450t, Руководство пользователя

Страница: 13 / 80

8 9
Turning the Power On and Off
Press the Power button to power on and off the camera.
The startup image displays briefly and the startup sound plays if enabled. •
This camera will also power up if the playback button is pressed • . If pressed, the last recorded photo, video
clip, or audio clip will be displayed and the lens will not be extended.
To turn off the camera, press the Power button , or the camera will automatically shut off when not used
for the selected Power Save (see page 65 for details) setting. The default setting is after 1 minute of inactivity.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial settings of your camera. First
is the setup of language menu. Specify in which language menus and messages are to be displayed on the LCD
monitor.
Setting the Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
Tap 1.
or
to turn pages.
Tap the desired language button and apply. 2.
Setting the Date & Time
Tap the screen to select Year/Month/Date or Hour/Minute. 1.
Tap 2.
or
to change the value for the date and time.
Tap 3. to apply.
If necessary, press to close the menu.
At this point, the camera settings are set to the default automatic mode and is ready to take photos and videos.
To ensure accurate battery level display, please set the battery type to match installed batteries. See page 66
“Setting Battery Type” for details.
Holding down •
or
keys to change the values continuously.
If the camera is without battery power for more than 48 hours, the initial settings •
may reset and require another setup.